热线: 400-869-3332
  • {dede:field.keywords/}

UAM-394M

KF94 口罩打片机

电话免费咨询
 一、设备标准件 Standard parts of equipment
1、 感应器:(设备如图一)
Cylinder: SMC (as shown in pic 1, pic 2 updated the cylinders to SMC)
                      图一 pic 1
2、 电机:松下(设备如图二)
Servo motor: Panasonic (The equipment is shown in pic 2. The motor is updated to Panasonic)
                     图二 pic 2
3、 控制面板:威纶(设备如图三)
Touch screen:WEINVIEW (as shown in pic3, updated the equipment to WEINVIEW touch screen)
                     图三 pic 3
4、 PLC:松下(设备如图四)
PLC:Panasonic (as shown in pic 4, updated the PLC to Panasonic )
                     图四 pic 4
5、 空气开关:施耐德(设备如图五空气开关更换为施耐德)
Air switch: Schneider (updated the Air switch to Schneider as shown in pic 5)
图五 pic 5
二、 设备结构件 Equipment structure
1 、 滑 动 部 件 H13/HRC55°; Sliding component H13/HRC55°
2、 切刀片:SHK-9/HRC58°; Scissors: SHK-9/HRC58°
3、 支撑部件采用:铝合金/喷砂阳极;
Supporting parts: aluminum alloy/sandblast anode
4、 其它部分:塑钢/电木/钣金.
Other parts: plastic steel/bakelwood/sheet metal
三、 设备工艺流程 Equipment process flow
1.设备工艺流程: Equipment process:
上布料→成型→上鼻梁→压花→口罩切片→ 折叠→再压花→口罩切片→口罩出料
→口罩堆叠流水线
Casting machine → equipment carrier → welding ear rope → folding ear rope → shaping ear rope → discharging of masks → stacking assembly line of masks
2. 设 备 图 片Equipment Diagram :
 
设备参数 Parameter of apparatus
1、 设备安放尺寸:5060mm *1050mm*2200mm(L*W*H)
Equipment placement size:5060mm *1050mm*2200mm (L*W*H)
2、 设备重量:300 KG
Weight of equipment: 450 KG
3、 设备用电压规格:220V
Voltage specification for equipment: 220V
4、 设备额定电流:25A
Rated current of equipment: 25A
5、 设备产能:150-200 片/MIN 左右(根据口罩片的平整程度及发片机的待机时间最终定义) Equipment capacity: about 150-200 pieces /MIN (the final definition is based on the level of mask pieces and the standby time of the transmitter)
6、 设备使用环境:<60° 不能长期在潮湿的环境中运行。
Equipment use environment: <60° cannot run in a wet environment for a long time.

  • ?
    ?
    XML 地图 | Sitemap 地图